CH-360D 单座高速模切机
功能特点 Characteristics
-
采用日本进口系统、运动控制器、伺服一体化智能控制，
-
使用木制（胶板）刀版，操作简单，节省生产成本，持久耐用。，
-
采用铸铁件机身，原装进口台湾，日本，德国等机器配件，确保机器高速运转的同时压力稳定，机器使用寿命更长。
-
采用漩涡式真空风箱，确保纸张张力恒定及不刮花材料，免用传统压纸板。 该机是PS版/凸版全轮转印刷机、柔性版印刷机、卫星式印刷机、PS版印刷机、间歇式印刷机最佳印后配套设备。
-
It adopts Japan imported system, motion controller, servo integrated intelligent control,
-
The use of wooden(plastic) knife plate, simple operation, saving production costs, durable. ,
-
It adopts deflective press type to be high speed die cutting machine, which is
-
durable and make sure the pressure is stable and the use of life is at least 20 years.
-
Using vortex vacuum bellows to ensure that the paper tension is constant and does not scratch the material, eliminating the use of traditional pressure cardboard
-
The machine is the best equipment combined with Letterpress full rotary printing machine, Flexo printing machine, Satellite printing machine, Offset printing machine and intermittent printing machine.
|
型号 Model |
CH-360 |
|
最大纸宽 Max Width |
350mm |
|
最大纸长 Max length |
400mm |
|
适用电压/电流 Voltage/current |
三相380v/32A |
|
主机总功率 Total power |
15kw |
|
机器重量 Machine weight |
≈2000kg |
|
最快速度 Max speed |
23000车/时 |
|
逆向烫金速度 Reverse hot stamping speed |
38m/min |
|
适用刀条厚度 Die cut plate thickness |
7mm-23mm |
|
最大模切面积 Max die cut size |
350mm*400mm |
|
适用材料：卷材 Applicable material roll |
≤350g |
|
最大送放卷直径/米数 Max rewinding/unwinding roll dia./meter |
600mm/2000m |
|
送纸机 Unwinding |
1台/set |
|
漩涡式张力风箱 Whirlpool type tension box |
1套/set |
|
模切上、下板 Die cutting upper/lower plate |
1套/set |
|
二次电眼追踪 Electrical-eyes sensor |
1套/set |
|
整压轮装置 Clamping wheel |
1套/set |
|
卧式收卷机 Horizontal rewind |
1套/set |
|
人机对话界面 Humanized operating panel |
1套/set |
--end--
声明：本文章由网友投稿作为教育分享用途，如有侵权原作者可通过邮件及时和我们联系删除：freemanzk@qq.com
